Serving the Killeen area  ·  (254) 312-9738  ·  Open Mon-Sat 7am-6pm
📞 (254) 312-9738 Free Quote

Spray Foam Insulation in Lampasas, TX (76550) · Local Professionals

Killeen Spray Foam Insulation · Fast response in Lampasas and the Killeen area · Free estimate 24h

✅ Written Estimates with R-Value & Thickness Specs 🛡️ Fully Insured 💸 Free Quote 24h 🕐 Mon-Sat 7am-6pm
+24Verified Reviews
14Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Fully Insured✅ Written Estimates with R-Value & Thickness Specs

Lampasas sits at the heart of Central Texas hill country, where older in-town homes and newer rural subdivisions on slab-on-grade foundations face the same long, brutal cooling season that runs from May straight through September. Your attic is the battleground: ductwork bakes in unconditioned space, humid air leaks through ceiling gaps and around penetrations, and rooms that should be cool stay stuffy and expensive to condition.

Killeen Spray Foam Insulation has been serving Lampasas and the surrounding Killeen area since 2012. We know the housing stock here, the way the heat builds in these attics, and what it takes to seal and insulate them right. Whether your home was built in the 1980s or 2000s, or you own a metal building or shop on the county stretches, we show up with a truck, a crew, and an honest estimate that names the R-value and thickness you are paying for.

Spray Foam Insulation in Lampasas (76550)

Lampasas County carries a mixed building stock: older homes clustered near downtown, newer subdivisions spreading into the rural stretches, and metal buildings scattered across the county's outer reaches. Nearly every house sits on a slab-on-grade foundation, which means the insulation story plays out in the attic and the walls, not underground. The problem is old and persistent: attics in Lampasas homes built from the 1980s onward often have flattened, settling insulation, leaky ceiling penetrations where plumbing and electrical chase through, and ductwork that runs through unconditioned space. In summer, humid air finds every gap in the ceiling and attic floor and pushes warm, damp air into the house. Metal buildings without foam sweat and develop condensate inside, a problem that spray foam is engineered to solve.

Our team brings the right tools and the right material for each job. Closed cell foam stops moisture and air movement in one pass, critical in humid climates like ours. Open cell foam is lighter, less expensive, and the right choice when vapor control is not the primary goal. We measure the space on site, specify the thickness and R-value in writing, and explain why we are recommending one or the other. We have been doing this in Lampasas and Killeen since 2012.

Our services in Lampasas

How a Job Works in Lampasas

We start with a free on-site assessment. You walk us through the problem: a summer electricity bill that has become unaffordable, upstairs or back rooms that never cool, or a metal shop that is too hot to use. We look at the attic or the space that needs work, measure it, identify what has to come out first (old insulation, debris, or contamination), and talk through the options. We give you a written estimate that names the R-value, the thickness per pass, the material cost, and the labor. No surprises, no pressure.

On the day of the work, our fully insured crew arrives with ventilation equipment. If old insulation has to come out, we remove it first and haul it away. We set up mechanical ventilation to manage the spray environment and control odor. The foam goes down in controlled passes, one layer at a time, at the thickness and ratio the manufacturer specifies. We do not rush the job or promise immediate re-entry. Depending on conditions and material, the cure window is typically twenty-four to forty-eight hours before the space can be occupied again. If you are living in the house during the work, we coordinate the schedule and make sure your family can access the rest of the home safely.

When the foam has cured, we inspect the coverage, clean up all debris from the job site, and walk through the finished work with you. You see what you paid for, and we are reachable if you have questions later.

Attic spray foam in Lampasas typically runs from $1.50 per square foot for open cell to $1.20 per board foot for closed cell, depending on the area to cover, the thickness you need, and whether old insulation has to be removed first. A typical attic job in a Lampasas home might be 1,200 to 1,800 square feet, so you are looking at a range of $1,800 to $3,600 or more for a complete seal and insulation. Wall and injection foam retrofit starts at $2 per square foot. If you have a crawl space or rim and band joists that need sealing, those jobs start at $2,500 and $650 respectively. Insulation removal runs from $950, and if you need the old material hauled away before new foam goes in, that cost stacks on top. Metal buildings and barndominiums on the Lampasas County stretches typically start around $1.75 per square foot. The final number depends on what you are starting with: a clean attic with sound framing costs less than one where old insulation is matted down, contaminated, or has to come out. Call us at (254) 312-9738 for a free estimate. We measure on site, give you a number in writing, and answer your questions before you commit.

✅ Written Estimates with R-Value & Thickness Specs, fully insured for work in Lampasas and nearby areas.

I live in an older Lampasas home with an attic that gets to 140 degrees in July and August. The upstairs stays hot no matter what the air conditioner does. Is spray foam the answer?
Yes, if the attic is the culprit. Spray foam seals the ceiling and the attic floor, stops humid air from leaking up into the unconditioned space, and insulates the ductwork that runs through it. But first, we look at what is up there. If the insulation is flattened, if there are gaps around the ductwork or the ceiling penetrations, or if the attic ventilation is pulling humid air in faster than the AC can push it out, foam fixes those problems. Sometimes the issue is ductwork that should not be in the attic at all, and that is an HVAC conversation, not ours. We tell you what we see and what we can fix with foam. Call us at (254) 312-9738 and we will come look.
I have a metal shop on the edge of Lampasas County, and in summer it sweats inside. There is condensate dripping off the metal roof. Can spray foam stop that?
Yes, but we have to start with the moisture source. If the building is sealed tight and has no ventilation, humidity builds up inside and condenses on the cold metal. Spray foam on the interior of the roof deck stops the temperature difference that causes condensation, but only if the space is dry to start with. If there is standing water or a roof leak, we fix the moisture first or we walk away. Once the substrate is dry and the space is ventilated, closed cell foam on the roof deck is the right answer. It stops the condensation, makes the space usable, and adds R-value. Call us at (254) 312-9738 to talk through the specifics of your building.
What does spray foam insulation cost for a typical attic job in Lampasas?
A typical Lampasas attic is 1,200 to 1,800 square feet. Open cell foam starts at $0.55 per board foot, closed cell at $1.20 per board foot. For a 1,500-square-foot attic with open cell, you might be looking at $1,500 to $2,500 depending on thickness and whether old insulation has to come out first. Closed cell runs higher because it stops moisture and air movement in one pass. If you need old insulation removed, add $950 to $1,500 for that labor. The only way to know is a free on-site estimate. Call (254) 312-9738 and we will give you a number in writing.
Who decides what R-value and thickness I need in my Lampasas attic, and do I need a permit?
The building code and the building official at your address decide the minimum R-value. In Lampasas and Coryell County, that is typically R-38 to R-49 for attic insulation, depending on the energy code in force. The ignition barrier and thermal barrier rules (the fifteen-minute thermal barrier distinction) are also set by code and enforced by inspection. We specify the thickness and R-value in our written estimate so you know what you are paying for. Permitting and contractor registration rules vary from city to city across the Killeen area, and there is no reciprocity between Texas cities. Check with the City of Lampasas or Coryell County to see what applies at your address. The City of Lampasas website at https://www.lampasastexas.org has contact information for the building department.
I live in a Lampasas home with a family. Can we stay in the house while the spray foam is being applied?
Yes, but with conditions. We set up mechanical ventilation during the spray and cure. The smell is strong during application and for a few hours after, and some people find it uncomfortable to be in the house. We recommend you plan to be away or stay in a part of the home that is closed off from the work area. The standard re-entry window is twenty-four to forty-eight hours after the foam is fully cured, depending on the material and conditions. Once that window passes, the space is safe to occupy. If you have young children, elderly family members, or anyone with respiratory sensitivity, talk to us about timing. We will help you plan a schedule that works for your family.
Are you insured for spray foam insulation work in Lampasas?
Yes. We are fully insured with general liability and workers' compensation coverage. Our crew carries the insurance that protects your property and our team while we work. When you call for an estimate, ask us for proof of coverage and verify it before we start. That is good practice with any contractor.
When is the best time of year to get spray foam insulation done in Lampasas?
Spring and fall are ideal. In summer, the heat and humidity make the work harder and the cure time longer. In winter, Lampasas does not get cold enough to stop the work, but you are less likely to be thinking about insulation when the AC is off. The real urgency comes in May and June, when the cooling season starts and homeowners see their electricity bills spike. If you are planning a job, spring (March to April) gives you time before summer heat hits. Fall (September to October) is when people realize they have been paying too much all summer and want it fixed before next year. Call us at (254) 312-9738 to schedule, and we will fit you in.
Why choose us?

Trusted professionals since 2012

🏅

Insured contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Fully Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sat 7am-6pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Spray Foam Insulation Services in Killeen

All your work handled by qualified professionals in Killeen

Attic Spray Foam Insulation

Attic spray foam for Killeen and Harker Heights rental homes

Included in your service

  • Air sealing attic bypasses in Killeen's 1980s rental stock
  • Open-cell foam applied under Killeen's vented attic deck
  • Ductwork runs protected from Bell County attic heat
  • Built for zone 2A's long hot and humid cooling season
Learn more→

Closed Cell Spray Foam Insulation

Closed cell spray foam for Temple and Belton slab foundations

Included in your service

  • Two-pound closed-cell foam rated for Bell County humidity
  • Added rigidity for rim joists in Temple's older homes
  • Vapor barrier built for zone 2A's humid summers
  • Ideal for slab-on-grade walls across Belton and Killeen
Learn more→

Open Cell Spray Foam Insulation

Open cell spray foam for Killeen area attics and walls

Included in your service

  • Expanding fill for rafters in vented Killeen attics
  • Sound-dampening foam for two-story Harker Heights rentals
  • Seals ceiling penetrations against zone 2A humidity
  • Applied in multiple passes per Central Texas attic depth
Learn more→

Wall & Injection Foam Insulation

Wall injection foam for older Temple and Belton homes

Included in your service

  • Small drill holes patched on Temple's older brick veneer
  • Foam injected into empty wall cavities across Bell County homes
  • Targets walls uninsulated before Killeen's 1980s boom
  • Cuts drafts through Coryell County winter freezes
Learn more→

Crawl Space Spray Foam Insulation

Crawl space spray foam for Temple and Coryell County homes

Included in your service

  • Foam applied to crawl space walls in older Temple homes
  • Band joist area sealed against rural Coryell County damp
  • Vapor barrier laid over bare soil in zone 2A humidity
  • Keeps humid summer air out of pier-and-beam floors here
Learn more→

Rim Joist & Band Joist Spray Foam

Rim and band joist foam for Killeen and Harker Heights homes

Included in your service

  • Rim joist perimeter foamed where the slab meets framing
  • Band joist gaps sealed against Bell County humidity
  • Stops drafts common in Harker Heights 1980s subdivisions
  • Closes hail-season leaks along the slab edge
Learn more→

Garage Spray Foam Insulation

Garage spray foam for Killeen, Harker Heights and Belton homes

Included in your service

  • Foam applied to garage walls and ceiling in Killeen homes
  • Cuts Central Texas summer heat from the attached house
  • Built for zone 2A's long cooling season
  • Fits garages converted to shops in Belton and Temple
Learn more→

Metal Building & Barndominium Spray Foam

Metal building spray foam for Coryell County shops and barndos

Included in your service

  • Interior wall and roof deck panels foamed against sweat
  • Stops condensate dripping inside Coryell County shops
  • Blocks radiant heat through zone 2A summer sun
  • Suited to barndominiums across rural Bell and Coryell land
Learn more→

Commercial & New Construction Spray Foam

New construction and commercial spray foam for Bell County growth

Included in your service

  • Attic and wall framing foamed before drywall in Temple builds
  • Roof deck insulation for unvented attics in new Belton homes
  • Sized to the energy code that applies at your Killeen address
  • Scheduled around framing crews on Harker Heights job sites
Learn more→

Insulation Removal

Attic insulation removal for older Temple and Killeen homes

Included in your service

  • Old insulation pulled from vented attics across Bell County
  • Rodent and moisture-damaged material cleared from Temple homes
  • Attic floor vacuumed before new foam goes in Killeen rentals
  • Prepped for re-insulation ahead of the long cooling season
Learn more→

Insulation Replacement & Re-Insulation

Insulation replacement for Killeen, Harker Heights and Temple

Included in your service

  • New attic insulation installed to a consistent level here
  • Old gaps and bypasses sealed across Bell County ceilings
  • Choice of open or closed cell foam for zone 2A
  • Matched to ductwork layouts in vented Killeen attics
Learn more→

Air Sealing

Air sealing for Killeen, Belton and Temple attics

Included in your service

  • Top plates and can lights sealed in Killeen attics
  • Ceiling penetrations closed against Bell County humidity
  • Blower door style checks fit for zone 2A homes
  • Keeps conditioned air in through the long cooling season
Learn more→
Verified client reviews

24+ Verified Client Reviews in Killeen

⭐⭐⭐⭐⭐ 4.9/5 · 24 verified Google reviews

Free Quote

Get Your Free Quote

Spray Foam Insulation in Killeen · Response within 24h · No commitment · ☎ (254) 312-9738

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Fully Insured 📍 On-site visits included in Killeen ✅ No hidden fees 🕐 Available Mon-Sat 7am-6pm