Harker Heights sits on a slab-on-grade foundation, and nearly every home built here since the 1980s for military families has its insulation story written in the attic and the walls, not underground. Most of those homes now have ductwork running through a vented attic, where summer heat and humidity do the damage that drives cooling bills up and keeps back bedrooms from ever cooling down.
We serve homeowners and property managers across Harker Heights (76548) and the surrounding Killeen area with spray foam insulation and air sealing that stops humid summer air from leaking into the ceiling and stops conditioned air from bleeding out through gaps in the walls. Since 2012, we have been the local crew that shows up with a truck with local plates, gives you a written estimate with R-value and thickness specs, and stays reachable when the work is done.
Spray Foam Insulation in Harker Heights (76548)
Harker Heights grew as wave after wave of single-story and two-story military family homes in the 1980s and 1990s, and many of those homes are now rentals with attic insulation that has been flattened by years of use or disturbed by HVAC work. The problem is real: humid summer air finds every gap around ceiling penetrations, every light fixture and exhaust duct, and pushes warm, damp air into the house. In a home where the air conditioner is already fighting attic heat radiating down through the ceiling, that leak costs money every day the cooling season runs, and it makes certain rooms impossible to keep comfortable.
We spray closed-cell and open-cell foam in attics and sealed roof decks across Harker Heights, seal rim and band joists, inject foam into closed walls where no cavity insulation was ever installed, and remove and replace insulation that has failed or settled. Our team is fully insured and has served the Killeen area since 2012 with the kind of honest guidance that tells you when a simple blown-in top-up is the right answer and when the old insulation has to come out first.
Our services in Harker Heights
- Attic Spray Foam Insulation in Harker Heights · Killeen attics bake all summer above ductwork in vented attics across these…
- Closed Cell Spray Foam Insulation in Harker Heights · Closed cell foam adds a rigid moisture barrier for Temple and Belton homes…
- Open Cell Spray Foam Insulation in Harker Heights · Open cell foam fills attic rafters and wall cavities across Killeen's 1980s and…
- Wall & Injection Foam Insulation in Harker Heights · Wall injection foam fills hollow cavities in older Temple homes near downtown…
- Crawl Space Spray Foam Insulation in Harker Heights · Some older Temple homes and rural Coryell County properties still sit on crawl…
- Rim Joist & Band Joist Spray Foam in Harker Heights · Rim joists sit at the slab edge in most Killeen and Harker Heights homes…
- Garage Spray Foam Insulation in Harker Heights · Garages in Killeen, Harker Heights and Belton sit hot and unconditioned through…
- Metal Building & Barndominium Spray Foam in Harker Heights · Metal shops and barndominiums across rural Coryell County sweat and condensate…
- Commercial & New Construction Spray Foam in Harker Heights · New homes and commercial buildings keep rising across Killeen, Harker Heights…
- Insulation Removal in Harker Heights · Flattened insulation is common in older Temple homes and Killeen rentals after…
- Insulation Replacement & Re-Insulation in Harker Heights · After removal, we re-insulate attics and walls in Killeen…
- Air Sealing in Harker Heights · Air leaks around ceiling penetrations let humid summer air into homes across…
How a Job Works in Harker Heights
We start with a free on-site assessment at your address in Harker Heights. We look at the attic or walls, check for moisture, leaks, or existing insulation that is settled or damaged, and talk through what you are trying to fix. That assessment becomes the foundation for a written estimate with the R-value and thickness we are going to spray, the area we are covering, and the cost. No surprises, no upsell.
On the day of the work, our fully insured crew sets up mechanical ventilation to manage fumes during the spray, covers or protects anything that should not get foam, and sprays the thickness and density we specified in the estimate. If you have old insulation that has to come out first, we remove it and haul it away. The work itself usually takes a day, depending on the area and whether we are doing removal. We leave the property clean and give you a clear re-entry window of twenty-four to forty-eight hours before the space is fully occupied, so you know when it is safe to use the room or attic access again.
Attic spray foam in Harker Heights typically runs from $1.50 per square foot for open-cell foam on a simple top-up, to $1.20 per board foot for closed-cell foam in a space where moisture control is critical. Wall injection foam for closed cavities in older Harker Heights homes starts around $2 per square foot. Crawl spaces and rim joist sealing run from $650 for a band joist to $2,500 and up for a full crawl space, depending on access and area. If old insulation has to come out first, plan on $950 to $2,800 depending on the volume and how it is packed. The real cost drivers are the area you are covering, the R-value and thickness the local code requires at your address, whether you need removal first, and how easy our crew can access the space. Call us at (254) 312-9738 for a free estimate, and we will walk you through what applies to your house and what it costs.
✅ Written Estimates with R-Value & Thickness Specs, fully insured for work in Harker Heights and nearby areas.